NTN UCFC213-208D1 Flange Block Bearings

S:14.3 mm; L:95 mm; T min.:-40 °C; T max.:100 °C; C:14 kN; A:27 mm; A1:13 mm; e:16 mm; Designation of housing:F205N-; A2:35.7 mm;

Setscrew Angle:65; Housing Series:115 SERIES (115 C); Bearing Bore Shape:Tapered; UPC:782475724901; Expansion Type:Expansion; Bearing Series:115 Series; Base to Center Hight Numeric:2.8800 in; Seal Type:Triple Lip; Split Housing:SPLIT; Shaft Attachment Type:SETSCREW;

B:25 mm; d:130 mm; D:190 mm; da:148 mm; Oil Holes:2.5 mm; Dynamic Load Rating:67.8 kN; Da:168 mm; Radius:1.5 mm; Static Load Rating:114.8 kN;

S:19 mm; A2:50.2 mm; B:49.2 mm; H:180 mm; C0:20.8 kN; d:44.45 mm; L:111 mm; T min.:-20 °C; Designation of bearing:UC209-28G2; Weight:1.9 kg;

Dynamic load, C:1,010 kN; db min:222 mm; Cb min:16 mm; Rating life coefficient, A2:1; Mass:25.2 kg; Characteristic cage frequency, FTF:0.43 Hz; Static load, C0:1,110 kN; r1s min:4 mm; Db min:336 mm; r1a max:3 mm;

a:19.4 mm; D1:89.7 mm; Preload value:0.177 kN; Characteristic inner ring frequency, BPFI:13.74 Hz; Preload level:GN; Db max:95.5 mm; Min operating temperature, Tmin:-20 °C; Axial rigidity:83.9 N/µm; Nlim (grease):13,800 rpm; d1:80.3 mm;

D:200 mm; Characteristic outer ring frequency, BPF0:4.08 Hz; Static load, C0:117 kN; d:110 mm; f0:14.3; B:38 mm; ra max:2 mm; Nlim (grease):3,200 rpm; Radial clearance class:CN; rs min:2.1 mm;

A2:33 mm; e:10 mm; A1:15 mm; A:32 mm; T max.:100 °C; d1:45 mm; B:30 mm; H3:90; C:27 kN; Weight:1.9 kg;

Ship Weight:90 LB; UPC:782476509644; Screw Treatment:ZINC PLATED; Material Type:CARBON STEEL; Brand:Baldor-Dodge; Square Tubing Size:3-1/2 X 3-1/2 X 0.18; Take-Up Frame Style:TOP ANGLE; Frame Size:400; Special Coating:STANDARD PAINT; Screw Diameter:1.5000 in;

J:132 mm; T max.:200 °C; T min.:-20 °C; A1:20 mm; N:23mm; G:M6x1; Designation of housing:F310-; C:62 kN; Recommended tightening torque for set screw:27.1 Nm; Designation of bearing:UC310-30G2T20;

H:57.2 mm; N:M16; H1:21 mm; E:25 mm; B:51.6 mm; s1:25.8 mm; J:95 mm; S:19 mm; T max.:100 °C; C0:23.2 kN;

B1:55 mm; A1:34 mm; C0:23.2 kN; Z:76.1 mm; G:R1/8"; N:18mm; d:45 mm; L1:61 mm; Designation of housing:PE210N-; s1:27.5 mm;

Designation of open end cover:SCOU205-16; J:105 mm; N1:19 mm; Dz:60 mm; Designation of housing:PH205N-; Z:47.8 mm; C:14 kN; T max.:100 °C; s1:17 mm; H1:16 mm;

Retainer Type:Std Retainer; Bearing Inner Ring Material:Steel; Bearing Outer Ring Material:Steel; Brand:Baldor-Dodge; Housing Material:Cast Iron; Bearing Series:209 Series; Bearing Insert Material:Steel; Housing Type:2 Bolt Pillow Block; Flinger Material:Steel; Expansion Type:Non-Expansion;

d:15 mm; B:31 mm; Designation of bearing:UC202G2L3; H2:101 mm; C0:6.65 kN; A1:22 mm; N:13mm; Recommended tightening torque for set screw:5.5 Nm; H:70 mm; T max.:100 °C;